Oceanair’s range of powered blinds can be controlled by either momentary or constant contact switches, or a five-position rocker switch that neatly integrates both options into one switch.

Momentary switches will only power the blind while the switch is pressed. This allows the blind to be easily stopped in any position.

Constant contact switches will, from a single press, power the blind until it is fully open or closed; the blind can be stopped at any point during operation.

Oceanair's five position rocker switch neatly integrates both options into one switch.

Alternatively, other switches, momentary or constant contact, can be used to control Oceanair's powered blinds
and curtains.

Battery powered tilt motor for Venetian blinds

Tilt WireFreeTM RTS
To adjust the tilt of the slats in Venetian blinds up to 15 kg.
Self-contained motor (no electric wiring) with integral radio control
Powered by long-life batteries.

Hand-held control of powered blinds, shades, and screens available in infra-red or radio remote control options.

Both radio and infra red remote control systems are available for the Oceanair range.

Radio control uses a high frequency signal to transmit instructions from the hand-held remote to the blind's hidden radio receiver. This system benefits from low power consumption, only requires simple wiring and is omni-directional.

Oceanair offer three different handsets dependent on the number of radio channels required. The most advanced offers 20 separate channels. Each channel controls up to seven different blinds which can be grouped to allow simultaneous operation. In effect, a single handset is capable of controlling a total of 140 different blinds.

Infrared is a line of sight system which avoids any interference with the boat's radio systems, ideally suited, for example, to the bridge area.